Product Description
Thick steel coil cut to length
The leveling line is also called the leveling and shearing line, the uncoiling line, and the cross-cutting line. It is used to uncoil, level, cut, and cut the metal coils into flat sheets of the required length and stack them. It is suitable for processing cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and various metal materials after surface coating.
Generally, this production line is suitable for steel coil deep processing enterprises, white home appliance manufacturers, etc. It is an auxiliary processing equipment for steel. Generally, the investment is relatively large and the output is relatively balanced. A standard production line has a storage table, a feeding trolley, auxiliary support, and uncoiling. It consists of machine, telescopic shovel head, leveling machine, looper, side guide, five-roller rough leveling and sizing machine, shearing machine, conveyor, stacking rack and discharging trolley.
1.Technical data:
| Technical Parameters |
| No |
Item |
Parameter |
| 1 |
Applicable materials |
hot rolled coils, national standard |
| 2 |
Steel coil performance |
δ=16 when ≤245MPa |
| 3 |
Material thickness |
4-16mm |
| 4 |
Kaiping base metal width |
900~2000 mm (spacing 2200mm) |
| 5 |
Inner diameter of steel coil |
φ760mm, φ510mm |
| 6 |
Steel coil outer diameter |
φ1200-φ2200mm |
| 7 |
Steel coil weight |
35T |
| 8 |
2+11 roller finishing and leveling machine working roller diameter |
φ250 x2200
|
| 9 |
Leveling roller material |
roll steel 60CrMo, hardness HRC60-64 |
| 10 |
Back-up roller material |
alloy steel 40Cr, hardness HRC45-50 |
| 11 |
Number of support rollers |
3 rows at the top and bottom, 6 rows in total |
| 12 |
Running speed |
18-30m/min |
| 13 |
Stamping board weight |
≤ 30,000Kg |
| 14 |
Length accuracy (length) |
± 1.5mm/2m |
| 15 |
Diagonal accuracy |
± 1.5mm/2m |
| 16 |
Unit speed |
30/min when plate thickness is 4-10mm;When the plate thickness is 10.1-16mm, 18/min |
| 17 |
Cutting method |
hydraulic shear cutting |
| 18 |
Stomping method |
Ordinary sliding stomping board |
2.shipping
3.workshop
4.FAQ
(1)Are you manufacture or factory ?
we are manufacture and we have more than 10 years'experience.
(2)what's your guaranty of machines?and how to make sure quality of machines?
Guaranty of machines is 12 months.and after finish machines,we will supply video of working machines,also welcome to visit our factory and inspection of machine on site.
(3)Engineer available overseas?
our engineer can go to your place for installation of machines,customers need responsible for round -way flight tickets ,accommodation and engineer's salary is 100usd/day.
(4)if spares broken ,how to deal with it?
we can send new spare to you by DHL courier,about 5 to 7days you can receive them.
(5)what's your payment term?
our payment term is 30% advance payment by T/T,other 70% balance payment before shipment.
5.For more information ,pls contact :
){kind=link}
){kind=link}